Hawker Richardson works with hundreds of suppliers to bring you the best solutions from around the world. Whether you require large scale production or you require tabletop one-off PCBs in R&D, there are a range of solutions to choose from.
These entry level solutions below will give you some idea of the products available if you wish to make single PCBs while minimising footprint and energy consumption.
TWS SR-2000 Manual Screen Printer
The SR 2000 manual screen printer is an entry-level printer enabling you to print at low cost, and at the same time delivering precision and ease of use.
TWS SR-2700 Semi-automatic High Performance Printer
This high performance printer from TWS boasts very good accuracy with a small footprint and compact design.
NEW TWS SR-3200 EVO Fully Automatic Printer
NEW from TWS, this printer is a standalone solution with fiducials automatic recognition and external loader/unloader pairing capability.
Dispensing manipulator LMdispense 901
The dispensing manipulator LMdipense is an economic alternative to that of dispensing pens. There is the possibility to replace the serial pressure-time dispensing mechanism with the quasi-volumetric dispensing mechanism of MARTIN.
High precision dispensing with the dispenseALL 420
This high precision dispensing systems from Fritsch is designed with up to three valves (depending on variant), allowing different media to be dispensed simultaneously.
This robust dispenser from PVA is ideal for manual dispensing and robust with stainless steel tank and value. It offers a maximum of 100 psi and Timed – Manual – Teach modes.
LM901 manual pick and place system
The LM901 is a fatigue free, cost-efficient manual assembly system ideal prototyping and small-series production. The LM901 efficiently applies solder paste or adhesive seamlessly to assembling chip, fine-pitch and special components in a quick, fatigue free process.
SM902professional Manual Pick and Place System
Another manual pick and place solution from Fritsch, the SM902professional System boasts a higher throughput than the SM and LM ranges from Fritsch.
Quadra DVC EVO Series
The Quadra DVC EVO series from TWS is one of the most economical and cost effective Surface Mount placement machines available on the market today. It is ideally suited to low volume high mix SMT assembly.
Minilab vapour phase batch oven from IBL
This impressively compact Minilab solution from IBL is a vapour phase and ideally suited to one-off / prototyping. It accommodates boards up to 300 x 275 x 80 mm, and has a high size to performance ratio.
MRO160 and 250 reflow soldering from Fritsch
This compact and entry level reflow solution is available in two sizes MRO160 accommodates board sizes: 200 x 160 mm; MRO250 accommodates board sizes: 350 x 250 mm. Both reflow between temperatures: 75-300°C.
TWS 850 Batch Reflow Convection Oven
TWS 850 is a powerful, compact reflow and convection oven with one heating zone ideal to perform soldering operations for small, prototype size SMT manufacturing.