Call us Now
1300 36 00 31
Call us Now
1300 36 00 31
Call us Now
1300 36 00 31
Call us Now
1300 36 00 31
Call us Now
1300 36 00 31
Call us Now
1300 36 00 31
The SEHO Power Selective soldering system offers exceptional flexibility and productivity. The SEHO Power Selective can be adapted to almost any manufacturing environment, whether as an inline or stand-alone solution.
Three different soldering processes can be combined in just one system and subsequent process steps such as cooling, selective brushing and AOI can also be integrated. And all this on only 5.5 square meters.
The innovative design can incorporate the PowerVision AOI which can be configured as needed i.e., for component placement inspection in front of a wave or a selective soldering machine, or for solder joint inspection after wave or selective soldering processes or as a combination of both inspection tasks, integrated into the same module to save space.
Inspect for soldering defects like incomplete solder joints, solder bridges or solder balls, AND it can read and process product IDs!
This powerful soldering system from SEHO is extremely capable and is ideal for high mix – high volume manufacturing. Not only is the SEHO Power Selective system highly capable but it also is extremely flexible and is offered as a standalone or inline solution, but added to that it’s modular so its capable of growing with your business, as your manufacturing requirements grow.
SEHO offer a range of Selective Soldering Solutions from Start Selective an entry level solution, and Select Line which is a mid-range solution.
This product is available to view in our virtual demo.
Click to the right if you’d like to see the product in-situ within an SMT line, where you can also view a 3D file and watch a short video introduction.
If you’d like more information first click below.
| Gripper Guidance System | ||
| 3-axis double portal system for installation of different gripper tools | – | Standard |
| Repeatability | ± 0.1 mm | |
| Rotating function | 0 – 360° | |
| Soldering angle set-up by tilting the gripper | 0 – 12° | |
| Conveyor Variants | ||
| Single and dual lane conveyor systems for standalone operation | – | Optional |
| Single and dual lane conveyor systems for inline operation | – | Optional |
| Max. board / carrier dimensions | 500 x 500 mm | |
| Micro Drop Jet Fluxer | ||
| Wetting width on PCB | 2 – 4 mm | |
| Automatic level control with capacitive sensor | – | Optional |
| Automatic flux quantity monitoring | – | Optional |
| Multiple nozzle heads | – | Optional |
| Flux types, alcohol or water based | Up to 5% solids content | |
| Preheating | ||
| Quartz or pulsar heating integrated or in a separate preheat module | – | Optional |
| Pyrometer for gradient-controlled preheat process | – | Optional |
| Convection heating cassette in separate preheat module | – | Optional |
| Top-side heating installed in the carrier gripper or in the preheat area | – | Optional |
| Soldering Units | ||
| Soldering units available for lead-free applications | – | Standard |
| Maximum solder pot temperature | Up to 350°C | |
| Quick change solder nozzles and multi-nozzle tools | – | Optional |
| Automatic wave height control | – | Optional |
| Automatic solder level control and solder wire supply | – | Optional |
| Software and Process Control Features | ||
| Online teach system with camera and offline teach program | – | Standard |
| Process visualisation | – | Optional |
| Automatic position correction and automatic Z-height correction | – | Optional |
| Intelligent tool management | – | Optional |
| Integrated selective brush system | – | Optional |
| AOI system for solder joint inspection | – | Optional |
| Connections and Machine Dimensions | ||
| Nitrogen supply | R ¼”, 4-8 bar | |
| Nitrogen consumption (single nozzle) | Appx. 1.5 – 2.0 m3/h | |
| Required nitrogen quality | 5.0 recommended | |
| Compressed air supply | R ¼”, Min 6 bar | |
| Exhaust | 1x 500 – 600 m3/h | |
| Voltages | 230/400 V-50 Hz-3 Phase+N+PE 3x 208 V-60 Hz-4 Phase | |
| Machine dimensions (small production cell w x l | 2170 x 2110 mm | |
| Machine dimensions (large production cell w x l | 2570 x 2210 mm | |
| FURTHER OPTIONS ON REQUEST | ||
| Gripper Guidance System | ||
| 3-axis double portal system for installation of different gripper tools | – | Standard |
| Repeatability | ± 0.1 mm | |
| Rotating function | 0 – 360° | |
| Soldering angle set-up by tilting the gripper | 0 – 12° | |
| Conveyor Variants | ||
| Single and dual lane conveyor systems for standalone operation | – | Optional |
| Single and dual lane conveyor systems for inline operation | – | Optional |
| Max. board / carrier dimensions | 500 x 500 mm | |
| Micro Drop Jet Fluxer | ||
| Wetting width on PCB | 2 – 4 mm | |
| Automatic level control with capacitive sensor | – | Optional |
| Automatic flux quantity monitoring | – | Optional |
| Multiple nozzle heads | – | Optional |
| Flux types, alcohol or water based | Up to 5% solids content | |
| Preheating | ||
| Quartz or pulsar heating integrated or in a separate preheat module | – | Optional |
| Pyrometer for gradient-controlled preheat process | – | Optional |
| Convection heating cassette in separate preheat module | – | Optional |
| Top-side heating installed in the carrier gripper or in the preheat area | – | Optional |
| Soldering Units | ||
| Soldering units available for lead-free applications | – | Standard |
| Maximum solder pot temperature | Up to 350°C | |
| Quick change solder nozzles and multi-nozzle tools | – | Optional |
| Automatic wave height control | – | Optional |
| Automatic solder level control and solder wire supply | – | Optional |
| Software and Process Control Features | ||
| Online teach system with camera and offline teach program | – | Standard |
| Process visualisation | – | Optional |
| Automatic position correction and automatic Z-height correction | – | Optional |
| Intelligent tool management | – | Optional |
| Integrated selective brush system | – | Optional |
| AOI system for solder joint inspection | – | Optional |
| Connections and Machine Dimensions | ||
| Nitrogen supply | R ¼”, 4-8 bar | |
| Nitrogen consumption (single nozzle) | Appx. 1.5 – 2.0 m3/h | |
| Required nitrogen quality | 5.0 recommended | |
| Compressed air supply | R ¼”, Min 6 bar | |
| Exhaust | 1x 500 – 600 m3/h | |
| Voltages | 230/400 V-50 Hz-3 Phase+N+PE 3x 208 V-60 Hz-4 Phase | |
| Machine dimensions (small production cell w x l | 2170 x 2110 mm | |
| Machine dimensions (large production cell w x l | 2570 x 2210 mm | |
| FURTHER OPTIONS ON REQUEST | ||
