Vision Engineering Swift PRO Elite Measuring Microscope

The Swift PRO Elite comes with a precision measuring stage offering 200 mm × 100 mm range in X and Y; For the 3-axis (Z) variant, Z-axis travel is 98 mm.

• For X and Y, measurement uncertainty (U₉₅, 2D) is given by 5 + (6.5 × L / 1000) µm, where L is the length in mm under controlled conditions at 100× magnification.
• For Z-axis (height) accuracy, approximately 10 µm at 100× magnification under similar conditions.

The system uses Vision Engineering’s patented twin-pupil, monoscopic Dynascope™ optics. The magnification choices are quick-change objectives:

• 1× objective → 10× total magnification
• 2× → 20×
• 5× → 50×
• 10× → 100×

The stage can support up to 10 kg of part or load. It features factory-set Non-Linear Error Correction (NLEC) calibration, which corrects for mechanical and stage errors across its full travel. This ensures consistent precision even for more demanding inspection tasks.

Illumination options include:

• Surface illumination (“quadrant surface”) with cool, colour-corrected LEDs.
• Substage / backlight illumination (with iris control) for profile/edge detection, translucent or thinner parts.
• Illumination control via software, to adjust lighting depending on the part’s material or contrast level.

The Swift PRO Elite occupies a relatively compact footprint given its capabilities: dimensions are approximately 680 mm (width) × 515 mm (depth) × 480 mm (height). As it includes stage motion and optics, a stable bench / vibration-controlled surface helps in getting its full accuracy.

The Swift PRO Elite is ideal for intricate part measurement and difficult-to-view samples, especially in sectors including: medical devices (e.g. implants, tubing, stents), precision engineered components (aerospace, automotive, defence), plastic mouldings/connectors, watchmaking, etc.

• Although accuracy is strong, very large parts beyond its stage size (200×100 mm or 150×100 mm) will require either multiple setups or a larger system.
• High magnification (100×) reduces field of view and depth of field, so sample preparation, lighting, and stable mounting become more critical.
• While built for comfort (Dynascope®, ergonomic design), operator training helps to fully leverage its capabilities and avoid measurement errors.
• The 3-axis variant adds Z-axis capability but likely increases cost and may affect cycle times when measuring height profiles.