Call us Now
1300 36 00 31
Call us Now
1300 36 00 31
Call us Now
1300 36 00 31
Call us Now
1300 36 00 31
Call us Now
1300 36 00 31
Call us Now
1300 36 00 31
THE PRINCIPAL OF THE TOGGLE MECHANISM
The over centre dimension is critical to the reliable function of the clamp, ensuring that the linkage locks sufficiently to allow the maximum output force even under arduous conditions. This is achieved by using the over centre principal, which provides a positive lock preventing the clamp from opening during work holding.
This product is available to view in our virtual demo.
Click to the right if youād like to see the product in-situ within an SMT line, where you can also view a 3D file and watch a short video introduction.
If youād like more information first click below.
| Holding Capacity | Plunger Stroke (mm) | Weight | Spindle Supplied | Air Connection Size | Cylinder Bore | Max Cylinder Air Pressure | |
| GH-30600PR-A | 600kg | 25mm | 4.2kg | SA-086512 | 1/8PT | 25mm | 9kgf/cm2 |
| GH-31200PR-A | 1200kg | 32mm | 10kg | SA-107515 | 1/8PT | 32mm | 9kgf/cm2 |
| GH-32500PR-A | 2500kg | 50mm | 19.63kg | SA-107515 | 1/8PT | 32mm | 9kgf/cm2 |
| Holding Capacity | Plunger Stroke (mm) | Weight | Spindle Supplied | Air Connection Size | Cylinder Bore | Max Cylinder Air Pressure | |
| GH-30600PR-A | 600kg | 25mm | 4.2kg | SA-086512 | 1/8PT | 25mm | 9kgf/cm2 |
| GH-31200PR-A | 1200kg | 32mm | 10kg | SA-107515 | 1/8PT | 32mm | 9kgf/cm2 |
| GH-32500PR-A | 2500kg | 50mm | 19.63kg | SA-107515 | 1/8PT | 32mm | 9kgf/cm2 |
